When labels are missing, illegible or no longer fit, circuits can be located and labelled correctly again.
Alexander Holleufer tests Flex+ Video from a real installation. Click the video for audio.
Applications
For tasks where the circuit needs to be located safely and quickly
Flex+ is for existing installations where labelling, documentation, or previous alterations slow down fault finding.
Find the correct supply without unnecessary interruption, testing and manual searching.
Map the installation in practice, even when documentation is lacking.
Clarify which points are sourced before altering, extending or documenting.
In the case
Everything you need is now in one Flex+ case
You receive the transmitter for the electrical panel, signal clamps for the relevant outgoing cables, and a handheld scanner for reading on site
Senders and signal clampsPosition the signal clamps around the outgoing cables you wish to identify.
Handheld scannerScan at outlets, cables, or equipment to identify the supply.
Up to 10 circuits at a timeMap multiple circuits in a single task without starting from scratch for each circuit.
Quick task start-upMake the solution easy to take on service, renovation, and relabelling work.
See the product in use
See the workflow before ordering
The video shows setup in the electrical panel, scanning in the installation, and reading the circuit ID the electrician works with.
Setup in the electrical panel
Scanning at outlets, cables, or equipment
Clear circuit ID on the scanner
Calculated value
Time savings are calculated based on specific tasks
In a validated example, Flex+ delivered a 71% time saving, equivalent to 37 hours and DKK 9,250 on the project.
71%
Time saving in the documented example, equivalent to 37 hours and DKK 9,250 saved on the project.
37 hourssaved throughout the project.
DKK 9,250calculated value per project.
DKK 4,000 / monthcalculated value for fixed service tasks.
ScenarioCalculated valueEstimated payback
RelabellingDKK 9,250 / project< 2 projects
Fixed service tasksDKK 4,000 / monthLess than 4.5 months
Calculated from validated Flex+ material. Figures are maintained 1:1 and should not be expanded with new estimates until live.
Frequently asked questions
Typical questions before purchase
Can Flex+ be used in live installations?
Yes. Flex+ is developed for circuit identification in live installations. Work must always be carried out in accordance with current regulations, risk assessments and the company's safety procedures.
How many circuits can I scan at once?
You can scan up to 10 circuits at once.
Can the signal be affected by other cables?
Flex+ is developed to reduce erroneous readings from nearby cables and circuits. You get a clear ID for the circuit you are working with.
Do I receive an audible tone or a definitive response?
Flex+ provides a clear ID instead of varying tones. This makes the result easier to read and reduces the risk of doubt.
How long does setup take?
Flex+ is designed for rapid setup in the electrical panel. The precise time required depends on the installation and the number of circuits you are working with.
Does Flex+ require a separate course?
No, not as a starting point. Electricians can usually get started quickly, and we recommend a short demo if the team will be using Flex+ across multiple task types.
What is the difference between Flex and Flex+?
Flex+ is relevant when you want to work with circuit searching in operation and scan multiple circuits at once. Contact us if you would like to clarify whether Flex, Flex+ or Core best suits your tasks.
Can I get help choosing the right solution?
Yes. Book a technical demonstration or contact us directly, so we can clarify the task and the correct Simplewire solution.
Next Steps
Ready to order Flex+?
Order Flex+ from Simplewire, or use your preferred wholesaler. Price: €2,400 excl. VAT.