100%
Flawless marking with guarantee.
Simplewire Core
Simplewire Core is installed in the electrical panel and sends markings to the cables. Always up to date. Always available.
Unique advantages
Imagine a label that you install in the electrical panel, which lives in your installation and follows you every time you make a change. You can get that with Simplewire Core.
100%
Flawless marking with guarantee.
0 hours
spent on the fact that electricians can't find their way around.
20x
Faster setup than traditional marking.
0 hours
used for relabeling.
Installation in practice
The video is from Tican and shows controllers, hubs, and clips in an active production installation. Here, the system has been retrofitted into the panel: 60 groups marked and a time consumption of one short working day.
Value per role
CFO / OWNER
Simplewire generates a rapid ROI depending on the complexity and scope of the installation. At the same time, it reduces technical debt, which minimizes risk, increases the value of the facility, and strengthens the company's adaptability.
Operations Manager
Create predictability in everyday life with accurate and up-to-date labeling. Reduce downtime costs and simplify renovations and modifications because the documentation is in place from the start.
Electricians
Get direct access to accurate and unambiguous labeling. Eliminate manual labels, strips, and uncertain troubleshooting, and complete the task faster and more professionally.
Compliance
Enhance traceability and audit readiness with a digital solution that tracks the installation throughout its lifecycle and ensures that documentation is always up to date and accessible.
Case evidence
In environments with chemical washdowns, high traffic, and high complexity, physical markings quickly disappear. Here, Core provides a complete overview with digital markings, allowing the team to respond more quickly to errors and breakdowns.
Experience shows that even short periods of downtime can pose a significant financial risk. That is why digital signage is quickly becoming a strategic investment rather than a technical detail.
Simplewire Core is installed on the output cables in the electrical panel and sends out digital markings that are picked up by the included scanner.
Install hardware without planned shutdowns, even in large buildings with many panels.
Configure locally via the controller interface and get 100% accurate and comprehensive labeling.
Scan wires, boxes, and outlets, and immediately identify where the power is coming from.
Digital marking from day one, with Core installed by the board manufacturer. Install the board, and marking is done.
Have the Core unit installed by the panel builder, install the panel, and finish the labeling on the first day.
Quickly fix the inadequate labeling by retrofitting Core into the existing boards.
Scanner in use
Once Core is installed in the panel, the scanner is used in the field to identify circuits directly at the wire, junction box, or outlet. The team gets a clear answer immediately and avoids unnecessary testing.
Find the right supply quickly without causing unnecessary downtime.
Verify the result in the field and reduce the risk of incorrect connections.
Establish a consistent workflow across electricians and service teams.
Frequently Asked Questions
No. The scanners are not tied to a specific installation and can be used across all Simplewire Core installations.
Yes. The indicator is still active, even if there is no power to the circuit—the system works both with and without power.
In an electrical panel with approximately 60 fuses, a complete installation typically takes 1–3 hours.
No. The system is designed so that anyone authorized to work on an electrical panel can install it.
No. The board documentation is stored on an SD card, which you can transfer to a new controller or device.
Typically, you can have a full installation up and running in just a few days. After that, the pace of deployment depends on how quickly users want to scale the solution.
No. Simplewire Core can be installed without turning off the power or disconnecting any wires.
Next step
We’ll review your dashboards, identify where Simplewire Core offers the greatest value, and assess how to set up a pilot program correctly from the start.
Call Simplewire at +45 72 11 91 91 if you need quick technical assistance or would like to schedule an initial meeting.
Next step
We review your electrical panels, identify where Simplewire Core adds the most value, and determine how to set up a robust pilot program from the start.
Call Simplewire at +45 72 11 91 91 if you need a quick technical clarification or would like to schedule an initial meeting.
Next step
We’ll review your electrical distribution panels, identify where Simplewire Core offers the greatest value, and determine the best way to set up a pilot project from the start.
Call Simplewire at +45 72 11 91 91 if you’d like a quick technical consultation or to schedule an initial meeting.
